How to Install Replacement Lenses into Your Ray-Ban Meta Smart Glasses

Install Your Lenses Quickly & Safely (Step-by-Step Guide)

Installing replacement lenses into your Ray-Ban Meta Smart Glasses is easy if you follow these simple steps. This guide is created to help you change your lenses at home without tools — no optical technician needed!

Note: Always handle your glasses and lenses gently to avoid scratches or damage.

---

1. Prepare Your Workspace

Before starting, make sure you have:

• A clean, flat surface

• Soft cloth or microfiber towel

• Good lighting

• Your replacement lenses

Tip: Avoid working on rough or dirty surfaces to prevent scratching your lenses or frames.

---

2. Remove the Old Lenses

1. Hold the Frame — Place your thumb and index finger on either side of the lens.

2. Apply Gentle Pressure — Press lightly from the back of the lens toward the front.

3. Pop the Lens Out — The lens should release from the frame once pressure is applied evenly.

If the lens feels stuck, flex the frame slightly to loosen it — but be gentle!

---

3. Align Your New Lenses

1. Check Orientation — Make sure you match the correct lens with the correct side (left/right).

2. Position at the Corner — Start by placing one corner of the new lens into the frame groove.

3. Seat the Lens — Using your fingertips, press the lens into the frame around the perimeter.

✅ You’ll hear or feel a light click when the lens is locked into place.

---

4. Inspect Your Glasses

✔ Confirm that the lens sits flush with the frame
✔ Check that there are no gaps or loose edges
✔ Wipe the lenses with a microfiber cloth to remove fingerprints

---

5. Final Tips for Perfect Fit

• Do not twist the lenses forcefully

• If the lens doesn’t fit, check that it’s the correct model

• Avoid using sharp tools that can damage the frame or lenses

---

Why This Matters

Proper installation ensures:

• Clear optics

• Secure fit

• No screen or sensor interference

• Longevity of your smart glasses

---